• Home > Factory News
    Assurance measures brick machine hydraulic system to normal operating temperature
    2015-6-25 23:22:07

    Shandong Shengya Machinery Co., Ltd. specializing in the production of various types of brick, brick machine, brick machine, hollow brick, pavement brick and other equipment of the old brick factory.
       Brick-making machine at work to ensure that the measures the normal operating temperature of the hydraulic system:
               1, when the high pressure control valve, the setting value, the working pressure should be reduced in order to reduce energy consumption;
               2, the hydraulic pump and junction leakage caused by the volume loss and fever, all connections should be tightened, to strengthen the seal;
              3, when the fuel tank capacity is small, poor heat dissipation, should be appropriately increased fuel tank capacity, providing the cooler when necessary;
              4, due to the oil viscosity is too high so that the internal friction increases when the heat should be used in low viscosity hydraulic oil;
              5, when the tubing is too thin and bent, so that the pressure drop along the fluid is increased, when the temperature rise, should increase the diameter, the length of tubing, make patency oil;
              6, the ambient temperature is so high that when the temperature rise, to use insulation material and the reflector, so that the system and isolated;
              7, high pressure oil from the spill unnecessarily long time back to the tank, so that when the temperature rise should be improved circuit design, the use of variable pump or unloading measures to ensure.
    According to the law of conservation of energy brick machine, brick machine hydraulic system energy losses in the work, will be converted into heat, so that the oil temperature rise of the hydraulic system. Usually oil hydraulic brick machine hydraulic systems should be controlled within (30-60) ℃ range, with a maximum (60-70) ℃.
        Shandong Shengya Machinery Co., Ltd. has been committed cement products machinery development, production and sale of advanced equipment, superb technical expertise and two decades of experience, the company has always been at the forefront of research and development center block molding machine market development Follow the advanced technology at home and abroad, to develop products for different investment needs of users, mainly block making machine, hydraulic tile machine, cement pipe machine, mixer, hanging roller machine, telephone poles machine equipment. At present the country with 19 offices and six overseas plants (Nigeria, Tanzania, Algeria, Kenya, Mozambique, Ethiopia) and exported more than 100 countries and regions.


    < a href=" ">在线客服