• Home > Factory News
    Brick bread often problems causes and solutions
    2015-8-27 17:36:48

    Shandong Shengya Machinery Co., Ltd. specializing in the production of various types of brick, brick machine, brick machine, hollow brick, pavement brick and other equipment of the old brick factory.
          Bread brick common problem causes and solutions:
          One: bread brick fabric layer of uneven thickness, especially in the longitudinal direction
    1. Cause: the case of uneven thickness of the fabric layer, mostly because the fabric base material caused by uneven.
    Treatment methods: by adjusting parameters or adjust equipment to make the base material under the material more uniform method of adjusting the level of the tiles around the same manner as above to adjust.
    Reason Fault: bread brick head tilted back and forth is not level, resulting in pre-press, press out shades fabric around the pit.
    Treatment methods: the indenter calibration level.
    II: Bread adobe brick edge burrs or missing fabric
    Cause one: mold gap between the frame and the ram plate too much.
    Processing: Adjust ram, ram plate and the gap between the mold frame as uniform as possible. If the mold frame and ram plate built between too much, can not be adjusted, can only repair or replace ram plate.
    Cause 2: Forming the magnitude of vibration force is too large, the amount of fabric from a gap between the head and the mold frame.
    Approach: reduce the amplitude of vibration force molding. (Such as by lowering the molding pressure, adjust the size of the pump low pressure, tighten the rubber mold frame, reducing the gap between the holder and the vibration box, pressing shaker springs, etc.)
    Shandong Shengya Machinery Co., Ltd. has been committed cement products machinery development, production and sales, with advanced equipment, superb technical expertise and two decades of experience, the company has always been at the forefront of research and development center block molding machine market development , concerned about the advanced technology at home and abroad, to develop products for different investment needs of users, mainly block making machine, hydraulic tile machine, cement pipe machine, mixer, hanging roller machine, telephone poles machine equipment. At present the country with 19 offices and six overseas plants (Nigeria, Tanzania, Algeria, Kenya, Mozambique, Ethiopia) and exported to more than 100 countries and regions.

    < a href=" ">在线客服