• Home > Factory News
    The classification of the concrete mixer and use
    2015-9-17 22:44:44

    Shandong wins the machinery co., LTD., specializing in the production of various types of brick machine, baking-free brick machine, brick making machine, hollow brick machine, the road of old brick machine, brick making equipment manufacturers.
    The use of the fall type concrete mixer
    (1), new before use should be in accordance with the requirements of the concrete mixer operation instruction, item by item for all systems and components and the necessary test run. Run idle, the rotation of the mixing tube or lobe direction, each work unit, braking, confirm the normal operation, before operation.
    (2) the stationary concrete mixer, should be installed on firm a pedestal. When use for a long time, should be buried land bolt; If short term use, can under stand laying wooden sleeper and leveling steadier.
    (3) for the mobile concrete mixer, should be installed on the smooth hard floor with wood or supporting frame in mind, and tires don't stress level. If you use the time more than three months, the tire should be properly kept, axle end should be to do a good job of cleaning and rust.
    The use of forced concrete mixer
    The use of forced concrete mixer, in addition to the reference since the fall of requirements, should also pay attention to the following son points:
    (1) mixing of concrete aggregate shall strictly selection, the largest diameter shall not exceed the allowable values, in case the card material. Every time when the mixer mixing drum materials, should not exceed the prescribed feed capacity, so as not to overload power.
    (2) the stirring blades and the bottom and side clearance, often should check whether conform to specified requirements. When clearance exceeds standard, can make the wall and the bottom of drill scrap the layer thickness, increase the difficulty and reduce the mixing efficiency when cleaning, such as mixing blade grinding, should timely adjust, repair or replacement.
    Shandong wins the machinery co., LTD., has been committed to cement products machinery research and development, production and sales, with advanced equipment, superb technical expertise and 20 years of practical experience, the company research and development center is always block the forefront of the market development, focused on the domestic and foreign advanced technology, developed suitable for different user demand for investment products, mainly have block forming machine, hydraulic tile machine, tube machine, mixer, cement hanging roller machine, pole machine equipment and so on. At present domestic has 19 offices and eight foreign factory (Nigeria, Algeria, Ethiopia, Kenya, Tanzania, Cameroon, Dr Congo, ivory coast) and exported to more than 100 countries and regions.


    < a href=" ">在线客服